• Did you know that…

    Moisture thermal insulation at the level of 12% increases heating costs by 30%

    The leakage caused by 10 mm gap (25cm long) causes 25 m2 room coolness within 2 hours and 10 minutes.

    Mould leads to asthma, allergies, sinusitis, pharyngitis, bronchitis and pneumonia, and in extreme cases, hepatic necrosis, renal dysfunction or even cancer (mycotoxins are carcinogenic compounds).

    Air conditioning operating costs can be reduced by 30% by using membrane with a metallized reflective layer reflecting solar thermal radiation.

    Earth water capillary permeation to the building structure leads to damages difficult to repair.

    We create products with passion every day. They protect buildings from rain, wind, temperature range and earth water. We rely on over 25 years of experience in building foils and roofing membranes production. Our group of companies provides materials to over 25 countries worldwide.

  • Did you know that…

    Moisture thermal insulation at the level of 12% increases heating costs by 30%

    The leakage caused by 10 mm gap (25cm long) causes 25 m2 room coolness within 2 hours and 10 minutes.

    Mould leads to asthma, allergies, sinusitis, pharyngitis, bronchitis and pneumonia, and in extreme cases, hepatic necrosis, renal dysfunction or even cancer (mycotoxins are carcinogenic compounds).

    Air conditioning operating costs can be reduced by 30% by using membrane with a metallized reflective layer reflecting solar thermal radiation.

    Earth water capillary permeation to the building structure leads to damages difficult to repair.

    We create products with passion every day. They protect buildings from rain, wind, temperature range and earth water. We rely on over 25 years of experience in building foils and roofing membranes production. Our group of companies provides materials to over 25 countries worldwide.

  • Did you know that…

    Moisture thermal insulation at the level of 12% increases heating costs by 30%

    The leakage caused by 10 mm gap (25cm long) causes 25 m2 room coolness within 2 hours and 10 minutes.

    Mould leads to asthma, allergies, sinusitis, pharyngitis, bronchitis and pneumonia, and in extreme cases, hepatic necrosis, renal dysfunction or even cancer (mycotoxins are carcinogenic compounds).

    Air conditioning operating costs can be reduced by 30% by using membrane with a metallized reflective layer reflecting solar thermal radiation.

    Earth water capillary permeation to the building structure leads to damages difficult to repair.

    We create products with passion every day. They protect buildings from rain, wind, temperature range and earth water. We rely on over 25 years of experience in building foils and roofing membranes production. Our group of companies provides materials to over 25 countries worldwide.

Sorberg Superior 220

Highly-vapour permeable roof membrane

SORBERG SUPERIOR 220, SORBERG STRONG 170
SORBERG SUPER 150, SORBERG EXTRA 135
SORBERG SOLID 115, SORBERG ULTRA 95
Three-layer highly-vapour permeable, waterproof and windproof membrane ideal for roof and walls protection along with thermal insulation against adverse weather conditions (wind, rain, snow, dust). Membrane regulates humidity level in the room giving its excess out.
Membrane is an initial layer of oblique ventilated roofing and building walls.
Membrane can be installed in both light roof sheathing (laths and counter-laths) and full roof sheathing (OSB, plywood or full boarding).
It can be laid directly on insulation layer, without keeping ventilation gap.
Membrane is highly resistant to aging. Additionally, membrane can be provided with scotch tape.

Sorberg Anticon Control S160

Extremely tear-resistant membrane enhanced with net.

SORBERG ANTICON CONTROL S160
Four-layer net enhanced membrane provides great roof and walls protection thanks to its high tear durability. It singles out due to the unique non-woven fabric structure based on polypropylene-based hot cast foil. This solution offers product which retains moisture on its surface, preventing moisture condensation from membrane run-off. The retained moisture has longer to evaporate.
This ensures maximum partition tightness of all types of roof structures, attic and inside walls. Protects thermal insulation and roof structure against moisture entering from the inside of the building.
When it comes to walls structure, it prevents plasterboards from damp and mould.
Membrane is highly resistant to aging.

Sorberg Protect 450
Highly-vapour permeable roof membrane enhanced with polyester

SORBERG PROTECT 450
Five-layer vapour permeable, waterproof and windproof membrane. Ideal for roof and walls protection along with thermal insulation against adverse weather conditions (wind, rain, snow, dust).
It singles out due to the unique structure based on a combination of bitumen APP (very high elasticity even at temperatures of -45 °C) and a carrier based on polyester (extremely tear-resistant). Top layers made of a polypropylene-based non-woven fabric give product, which retains moisture on its surface, preventing moisture condensation from membrane run-off. The retained moisture has longer to evaporate.
Membrane is an initial layer of oblique ventilated roofing and building walls.
Membrane can be installed in both light roof sheathing (laths and counter-laths) and full roof sheathing (OSB, plywood or full boarding).
It can be laid directly on insulation layer, without keeping ventilation gap.
Membrane is highly resistant to aging.
Sorberg Termo Control
Highly-vapour permeable roof membrane with metallized reflective layer reflecting thermal radiation

SORBERG TERMO CONTROL
Multi-layered highly-vapour permeable, waterproof, windproof and thermal radiation reflective membrane. Ideal for roof and walls protection along with thermal insulation against adverse weather conditions (wind, rain, snow, dust).
Metallized reflective layer reflects thermal radiation protecting attic against overheating during hot weather and reducing flow of heat from the inside of the house in winter. Reflective layer reflects 90% of thermal radiation, thus contributing up to 30% savings on the air conditioning cost in summer and heating in winter. Membrane regulates humidity level in the room giving its excess out.
Membrane is an initial layer of oblique ventilated roofing and building walls.
Membrane can be installed in both light roof sheathing (laths and counter-laths) and full roof sheathing (OSB, plywood or full boarding).
It can be laid directly on insulation layer, without keeping ventilation gap.
Membrane is highly resistant to aging. Additionally, membrane can be provided with scotch tape.
Sorberg Metalic 3D
Highly-vapour preamble roof membrane with of separation-drainage layer

SORBERG METALIC 3D
Four-layer highly-vapour preamble, waterproof and windproof membrane. Ideal for roof and walls protection along with thermal insulation against adverse weather conditions (wind, rain, snow, dust). The top is formed of braided of separation-drainage fibers mat, thanks to which wicking gap is created. Membrane regulates humidity level in the room giving its excess out. It reduces temperature reaching roof and noise.
Membrane is an initial layer of roofing and flat sheet facades.
Membrane can be installed in both full roof sheathing (OSB, plywood or full boarding) and light constructions, e.g. façade.
It can be laid directly on insulation layer, without keeping ventilation gap.
Membrane is highly resistant to aging. Additionally, membrane can be provided with scotch tape.
Sorberg Wind Stop
Wind-insulated highly vapour preamble membrane

SORBERG WIND STOP
Double-layer highly vapour preamble and windproof membrane. Ideal for roof and walls protection along with thermal insulation against adverse weather conditions (wind, rain, snow, dust). Membrane regulates humidity level in the room giving its excess out.
Successfully used in frame construction houses, log cabins, residential and industrial buildings.
It can be laid directly on a layer of insulation, without observing the ventilation gap.
Membrane is highly resistant to aging. Additionally, membrane can be provided with scotch tape.
Sorberg Anticon 100
Intelligent membrane

SORBERG ANTICON CONTROL 100
Two-layer membrane with a unique non-woven fabric structure based on polypropylene-based hot cast foil. This solution offers product which retains moisture on its surface, preventing moisture condensation from membrane run-off. The retained moisture has longer to evaporate.
This ensures maximum partition tightness of all types of roof structures, attic and inside walls. Protects thermal insulation and roof structure against moisture entering from the inside of the building.
When it comes to walls structure, it prevents plasterboards from damp and mould.
Membrane is highly resistant to aging. Additionally, membrane can be provided with scotch tape.
Sorberg Air 140
Low-vapour permeable foil with micro-perforation enhanced with net

SORBERG AIR 140
SORBERG AIR 110
SORBERG AIR 90
Three-layer low-vapour permeable, waterproof and windproof net enhanced foil provides great roof and walls protection thanks to its high tear durability. Micro-perforated foil is easily installed and high temperature resistant. Ideal for roof and walls protection along with thermal insulation against adverse weather conditions (wind, rain, snow, dust). Membrane regulates humidity level in the room giving its excess out.
Initial covering for ventilated pitched roofs non-insulated or insulated.
Foil should be used for light roof sheathing (laths and counter-laths), do not use for a full roof sheathing (OSB, plywood or full boarding).
In insulated attics ventilation gap of minimum 5cm has to be kept between insulation layer and foil.
Foil is highly resistant to aging.
Sorberg Silver Air
Low-vapour permeable foil with micro-perforation enhanced with fabric

SORBERG SILVER AIR
Double-layer low-vapour permeable, waterproof and windproof fabric enhanced foil provides great protection to the roof structure due to its high durability. Micro-perforated film is easily installed and high temperature resistant. Ideal for roof and walls protection along with thermal insulation against adverse weather conditions (wind, rain, snow, dust). Membrane regulates humidity level in the room giving its excess out.
Initial covering foil for oblique ventilated roofing, both non-insulated and insulated.
Foil should be used for light roof sheathing (laths and counter-laths), do not use for a full roof sheathing (OSB, plywood or full boarding).
In insulated attics ventilation gap of minimum 5cm has to be kept between insulation layer and foil.
Foil is highly resistant to aging.
Sorberg Reflex 150
Highly vapour-barrier foil enhanced with net with a metallized reflective layer reflecting thermal radiation

SORBERG REFLEX AL90
SORBERG REFLEX AL150
Metallized layer reflecting infrared radiation contributes to the energy balance of the building by reducing the costs of maintaining a constant room temperature (heating and air conditioning). Also great as floor heating insulation.
Three-layer highly vapour-barrier, waterproof and windproof foil net enhanced provides great protection due to its high tear-durability.
This ensures maximum partition tightness of all types of roof structures, attic, inside walls, floors and ceilings. Quarantines thermal insulation and roof structure protection against moisture entering from the inside of the building, and capillary moisture floor protection. Foil prevents the growth of fungi causing mould.
Foil is highly resistant to aging. Additionally, membrane can be provided with scotch tape.
Sorberg Barrier 140
Vapor-barrier foil enhanced with net

SORBERG BARRIER 140
SORBERG BARRIER 110
SORBERG BARRIER 90
Three-layer vapor-barrier, waterproof and windproof foil net enhanced. Provides great protection due to its high durability.
It provides partition tightness to all types of roof structures, attic and walls inside. Creates a thermal insulation and roof structure protection against moisture getting from the inside of the building. The foil prevents the growth of fungi causing mould.
Foil is highly resistant to aging.
Sorberg Silver Barrier
Vapor-barrier foil enhanced with fabric

SORBERG SILVER BARRIER
Double-layer vapor-barrier, waterproof and windproof fabric enhanced foil provides great protection due to its high durability.
It provides partition tightness to all types of roof structures, attic and walls inside. Creates a thermal insulation and roof structure protection against moisture getting from the inside of the building. The foil prevents the growth of fungi causing mould.
Foil is highly resistant to aging.
Sorberg Profoil
Vapor-barrier made of high-quality PE

SORBERG PROFOIL
Vapor-barrier foil provides partition tightness to all types of roof structures, attic and walls inside. Creates a thermal insulation and roof structure protection against moisture entering from the inside of the building. The foil prevents the growth of fungi causing mould.
Highest quality materials usage results with product of highly vapor-barrier.
High temperature resistant and easy to install.
Foil is highly resistant to aging.
Sorberg Luxfoi
Vapor-barrier foil made of PE obtained from 100% recycling

SORBERG LUXFOIL
Vapor-barrier foil, made of materials obtained from recycling, introduces ecological solutions to the construction industry. It provides partition tightness to all types of roof structures, attic and walls inside. Creates a thermal insulation and roof structure protection against moisture getting from the inside of the building. The foil prevents the growth of fungi causing mould.
It is high temperature resistant and easy to install.
Foil is highly resistant to aging.
Sorberg Unifoil A
Insulation foil

SORBERG UNIFOIL
Foil guarantees maximum insulation of floors, tiles, ceilings and screeds against capillary moisture from the ground or lower floor rooms. It protects structure of floors and prevents mould expansion.
It can be used as anti-mould or soundproof isolation under floor panels.
It is easy to install and tear-resistant. Due to the high durability and weather conditions resistance is also used as a protective foil for materials, window frames, roof sheets, and elevations during construction works.
Foil is highly resistant to aging.
Sorberg DCP
Foundations foil

SORBERG DPC
Foundations foil protects walls and foundations against earth water capillary permeation to the building structure. It is also an effective wall plates insulation. It successfully replaces traditional tar paper and pitch insulations.
Foil’s textured surface is non-slip, provides hardy mortar connection. Being a combination of polyethylene, it is water and decay resistant. Also flexible and durable.
One layer use.
Foil highly resistant to aging.
Sorberg Bitumen
Bitumen Membranes

SORBERG BITUMEN
We offer wide range products, starting from traditional roofing asphalt and oxidized torchable membranes up to premium quality materials include a variety of SBS and APP modified bitumen and special fire prove systems.
We offer a variety of membrane thicknesses and finishing, smooth, PE film, sand, mineral granule or self-adhesive. Granule surfaces give possibility choice of colors to top off individual design. Factory-applied granule surfacing provides long-term protection from UV rays.
 

Our products are available in over 25 countries worldwide.

If you have any questions please contact:  sorberg@sorberg.com

Ringstedgade 25

Roskilde 4000

Denmark

Tel: +48 722 362 221